Installation/Putting into operation
26 MultiPress S Operating manual 3.0 Rev: 3.6.2009
3.2.1 Setting the language
To show display messages in a different language, proceed as follows:
› Select the menu item Setup using the selection keys.
› Press the ENT key
At top left, "Setup" is displayed.
› Select the menu item Sprache using the selection keys.
› Press the ENT key.
In the top left display box, "Sprache" is displayed.
› Select the desired language using the selection keys.
› Press the ENT key.
The display is shown in the selected language.
3.2.2 Testing the safety devices
In order to guarantee the safe operation of the MultiPress S, during
commissioning and regularly after one month, the safety devices must be
tested for their function.
Information on the menu guidance can be found in Chapter 6‚
"Operation", on page 37.
Testing program interruptions opening the sliding door
The programs may only be started with the sliding door closed.
› Open the sliding door
› In the main menu, select the entry Start.
› Press the ENT key.
"start" appears in the menu box, and the entry Preheating is
preselected.
To Next Page
Loading...