EC Declaration of conformity
MultiPress S Operating manual 3.0 Rev 3.6.2009 69
11. EC Declaration of conformity
EC Declaration of Conformity in accordance with Machinery
Directive 98/37/EC, Appendix II A
The manufacturer/seller
LPKF Laser & Electronics AG
Osteriede 7
D-30827 Garbsen
hereby declares that the following product conforms to the provisions of
the directive(s) identified above - including the modifications effective at
the time of this declaration.
The following harmonized standards were applied:
• EN 349:1993 - Safety of machinery - Minimum gaps to avoid
crushing of body parts
• EN 292-1:1991 - Safety of machinery - Basic terms, general
principles for design - Part 1: Basic terminology, methods
• EN 292-2:1991+A1:1995 - Safety of machinery - Basic terms,
general principles for design - Part 2: Technical principles and
specifications
• EN 1050:1996 - Safety of machinery - Principles for risk assessment
• EN 563:1994+AC:1994+A1:1999 – Safety of machinery -
Temperatures of touchable surfaces - Ergonomics data for
establishing temperature limit values for hot surfaces (contains
Corrigendum AC:1994 and Amendment A1:1999)
• EN 60204-1:1997 - Safety of machinery - Electrical equipment of
machines - Part 1: General requirements
• EN 61000-3-2:2000 – Electromagnetic Compatibility (EMC) - Part 3-
2: Limits – Limits for harmonic current emissions (Equipment input
current up to 16 A per phase)
• EN 61000-6-2:2001 – Electromagnetic Compatibility (EMC) - Part 6 -
Generic standards - Immunity for industrial environments
• EN 61000-6-3:2001 – Electromagnetic Compatibility (EMC) - Part 6-
3: Generic standards - Emission standard for residential, commercial
and light-industrial environments
Product designation: Hydraulic press
Series/type designation: MultiPress S
Product versions:
– with automatic hydraulic pump
– with hand pump
To Next Page
Loading...