Introduction
MultiPress S Operating manual 3.0 Rev 3.6.2009 3
Introduction
The LPKF MultiPress S is an easily handable benchtop system for the
low-cost pressing of multilayer printed circuit boards for the electronic
sector.
The MultiPress S is suitable in particular for prototype and small series
production. It allows rigid, rigid/flexible and flexible printed circuit board
materials to be pressed to a multilayer PCB. The uniform pressure and
temperature distribution over the entire press surface ensures a
homogeneous material composite.
The menu-guided operation is easy to learn and does not require any
special previous knowledge. It is possible to press multilayers ranging in
size from 100 x 100 mm to 200 x 75 mm. Program-controlled
temperature and pressure guarantee optimum results.
Equipment
• Menu-guided control via LCD display
• A permanently defined process profile for multilayers of 4, 6 and 8
layers.
• Six freely configurable process profiles for processing different
materials and applications
• Versions:
– Automatic hydraulic pump with process-guided pressure control.
– Hand pump for manual pressure control
Optional accessories
• Mobile benchtop, a benchtop developed especially for the
requirements of the MultiPress S, allowing its use in different rooms.
• Automatic hydraulic pump for simple changeover of the MultiPress S
via a hand pump to fully automatic operation with process-controlled
pressure.
• LPKF base materials and consumables
To Next Page
Loading...