Information on this manual
MultiPress S Operating manual 3.0 Rev 3.6.2009 5
• Software elements:
– Menu entries, e. g. Open > File...
– Input boxes, selection boxes and lists, e. g. Tool Selection List
– Buttons, e. g. Cancel
– Windows, dialog boxes, e. g. input windows Tool Positions
Italic print Text in italic print and inverted commas identifies "Software Messages".
Words in italic print identify Proper Names.
Symbols at the beginning
of a sentence
• Lists start with a bullet in bold print.
› Action commands are preceded by an arrow.
Indented paragraphs Indented paragraphs following an action describe events of the
action that was just carried out.
Numbers Numbers in bold print in figures identify numberings (1) or dimensions
(
50 mm).
Numbers in bold print written in parentheses (1) identify the number in the
figure described.
Figures and tables are named in the margin and are numbered
consecutively.
Symbols and signal words
Fig. 1:
WARNING
Danger to life or health.
This symbol together with the signal word WARNING! indicates a
dangerous situation in which in case of non-observance of the
information there is a risk to life or health.
CAUTION
Risk of material damage.
This symbol together with the signal word caution indicates a
situation which in case of non-observance of the information can
result in material damage.
Tip: The hand indicates tips for easier handling, material use and/or
further processing.
To Next Page
Loading...