LS tractor MT563 User Manual

3 -33
① ESC main switch
 This switch is used to enable the Engine Speed
Cruise control(ESC) function.
 If pressing the ESC main switch from position 0
to position 1 (Off –> Ready),
- ESC indicator on the instrument panel will be
blinked.
- Engine speed stored on ECU will be displayed
on LCD panel.
 If pressing the ESC main switch from position 1
to position 2 (Ready –> Resume),
① (if pressing below 2 second) – ESC
indicator will be ON and engine speed cruise
control (ESC) will begin.
② (if pressing over 2 second) – current engine
speed will be stored on ECU and the stored
engine speed will blink 3 times on LCD panel.
 To exit the ESC control,
-. Press the lower side (“Off position”) of the
ESC main switch or press down the brake
pedals.
(13) Engine Speed Cruise control (ESC) switch
ESC main switch
• Position 2 : Resume
• Position 1 : Ready
• Position 0 : Off
ESC indicator
ESC mode display

LS tractor MT563 Specifications

General

Brand	LS tractor
Model	MT563
Category	Tractor
Language	English