4 -2
7. Check if the engine oil
pressure indicator and
battery charging indicator
are OFF. If any of these
indicators are ON, stop the
engine immediately and
check the problem.
8. Run the engine for a few
minutes to allow the
engine oil and
transmission oil to warm
up.
(1) Engine start
Throttle pedal
Shuttle lever
Range gear
shift lever
1. Sit in the driver’s
seat and check if
the parking brake
is applied.
2. Place the main gear shift, range
gear shift lever, shuttle lever in
NEUTRAL and PTO switch in “OFF”
position.
3. Pull the throttle lever to
the low speed position.
6. Depress clutch pedal
fully and turn key switch
to “START” position. As
soon as the engine has
been started, release
the key switch to “ON”
position.
Main gear
shift lever
Throttle lever
Brake pedal
Clutch pedal
PTO gear lever
4. Turn key switch to “ON”
position and check if the
engine oil pressure
indicator, battery
charging indicator and
cold start aid indicator
are turned on.
5. Wait until the cold start
aid indicator is turned
off. (about 10 seconds)
Caution
▶Check each part before starting
the engine.
▶Check if there is some other
people around before starting.
▶Place all the levers and
switches in NEUTRAL or OFF
position.
4-2. Engine Start and Stop
To Next Page
Loading...
