LS tractor MT563 - Auto Lift Control (MHL, if Fitted)

3 -52
Down
Up
Auto lift
down switch
▶ When driving on the road, lift up the implement with the position control lever and
lock the down speed control knob slightly.
▶ When lifting up or down the implement with auto-lift control switches, do not
approach the implement. And before using the switches, you have to check the
safety conditions of the working area.
Warning
(6) Auto lift control (MHL, if fitted)
※ It is used to lift the implement up to the highest
position quickly and lower it down to the position
set by position control lever without using the
position control lever.
 Pull the auto-lift-up switch backward to lift up the
implement.
 Press the auto-lift-down switch to lower down the
implement. At this time, the auto-lift-up switch
returns forward automatically.
 When the auto-lift-up switch is pulled back, the
implement will NOT be moved by position control
lever.
 When lifting up the implement, the PTO shaft will
be stopped in case that the PTO mode switch is
placed in “AUTO” position. (optional)
Auto lift
up switch