4 -6
Position control
lever
▶Release the clutch pedal slowly. If not, the transmission gear life shall be reduced
and it may cause a sudden start.
Notice
Throttle pedal
Clutch pedal
Brake pedals
F/R shuttle lever
Throttle lever
Parking brake
lever
Main gear
shift lever
1. Lift up all the implements
(front/middle/rear) from the ground
after starting engine.
2. Pull the throttle lever to the low
speed position.
3. Depress clutch pedal fully.
4. Place the transmission gear levers
(Main, Range, Creeper, Shuttle
lever) on a suitable position.
5. Press down the brake pedals and
release the parking brake lever.
6. Release the clutch pedal slowly
with pressing down the throttle
pedal slowly.
(2) How to drive
① Synchro-shuttle model
To Next Page
Loading...
