LS XGT Series - XGT Pnet + Composite System

Chapter 4 System Configuration
4-2
4.1.2 XGT Pnet + Composite System
If it is used with another company product, GSD file provided by the maker is needed. After GSD file is copied
to GSD folder of Pnet configuration software tool(SYCON, N Configurator) and then if you use Pnet
configuration software tool(SYCON, N Configurator), you can configure the slave modules in the network
automatically.
XG5000
N Configurator
GPL-DT4C/C1
GPL-TR2C/C1
GPL-TR4C/C1
GPL-D22C
GPL-D24C
GPL-RY2C
[Figure 4.1.2] XGT Pnet + Composite system Diagram
5.
시스템
구성
5.2 GLOFA PLC Ethernet
시스템
5.
시스템
구성
5.2 GLOFA PLC Ethernet
시스템
Sensor