Chapter 7 N Configurator Setting
7-17
7.5 Download and upload Network Configuration
PROFIBUS DP Master is communicated through Network Configuration. To do so, there is a
downloading function to apply the composed Network Configuration to the Master. In addition,
the uploading function, which is core technology of our company, can read and restore the
Network Configuration downloaded to the existing Master.
7.5.1 Download Network Settings
(1) Communication connection settings
In order to download the Network Configuration composed on the topology window to the
XGT Pnet Master module, first of all, you should set up connection to XGT CPU.
If you select “Settings…” item from the “Communication” menu, the window will be
popped up as seen below. Here you should select “Communication with XGT” and enter
the information with current XGL-PMEC module, and click “OK” button.
[Figure 7.5.1] Communication Settings window: Information of XGL-PMEC settings
Then, XGT CPU connection settings window will pop up as shown below. If a user clicks
“Confirm” button by selecting the settings connected by the user, then the connection
settings will be finished.
[Figure 7.5.2] XGT CPU connection settings
To Next Page
Loading...
Need help?
General
