MODEL 9DP-1 Operator’s Manual
Ludlum Measurements, Inc. 45 December 2015
Note: “Status” is not available with the current firmware release.
Date
“Date” is a text value which indicates the instrument stored date when the
event occurred. “Date” is in the format MM/DD/YYYY. To set the date,
see Section 6.2.3.
Time
“Time” is a text value which indicates the instrument stored time when the
event occurred. “Time” is in the format HH:MM:SS and is reported in 24-
hour mode. To set the time, see Section 6.2.4.
Model
“Model” is a text value which indicates the model as defined by Ludlum
Measurements. “Model” may contain up to 16 alpha-numeric characters.
Serial Number
“Serial Number” is a text value which indicates the serial number defined by
Ludlum Measurements before the instrument left the manufacturing facility.
“Serial Number” may contain up to 16 alpha-numeric characters.
User ID Number
“User ID Number” is a text value which is assigned by the user and may
contain up to 16 alpha-numeric characters. To set “User ID Number,” see
Section 6.4.2.5.2.3.
User Serial Number
“User Serial Number” is a text value which is assigned by the user and may
contain up to 16 alpha-numeric characters. To set “User Serial Number”, see
Section 6.4.2.5.2.4.
Chamber Temperature
“Chamber Temperature” is a numerical value representing the ion chamber
temperature in degrees Celsius. “Chamber Temperature” is in the format
XX.X.
High Voltage
“High Voltage” is a numerical value representing the ion chamber wall
voltage in volts. “High Voltage” is in the format –XX.X.
To Next Page
Loading...
Need help?
General
