MODEL 9DP-1 Operator’s Manual
Ludlum Measurements, Inc. 46 December 2015
Battery Voltage
“Battery Voltage” is a numerical value representing the internal battery pack
voltage (or the wall charger supply voltage if the wall charger is connected at
the time of the reading). “Battery Voltage” is in the format X.XX.
Reading
“Reading” is a numerical value representing the reading associated with the
event type. If the event type is “Log,” the reading will represent the last rate
displayed on the measurement view. If the event type is “Dose,” the reading
will represent the last integrated dose reading at the time of the event. In
either case, “Reading” is in the format XXX.X.
Reading Multiplier
“Reading Multiplier” is a numerical value representing the reading multiplier
associated with the event type. If the event type is “Log,” the reading
multiplier will represent the lowest possible multiplier for the rate reading
(typically micro). As a result, rate readings will always have the same
“Reading Multiplier.” If the event type is “Dose,” the reading will represent
the integrated dose reading multiplier defined by the “Integrate” feature at
the time of the event. In either case, “Reading Multiplier” is in the format
X.XXEX.
Reading Units
“Reading Units” is a text value representing the reading units associated with
the event type. If the event type is “Log,” the reading units will represent the
last rate units displayed on the measurement view. If the event type is
“Dose”, the reading will represent the last integrated dose reading units at the
time of the event.
Integrate Reading
“Integrate Reading” is a numerical value representing the reading associated
with the Integrate feature. “Integrate Reading” is in the format XXX.X. For
more information, see Section 6.4.1.6.1.
Integrate Multiplier
“Integrate Multiplier” is a numerical value representing the multiplier
associated with the Integrate feature. “Integrate Multiplier” is in the format
X.XXEX. For more information, see Section 6.4.1.6.2.