Lynx
®
NGT-9000
Pilot’s Guide 1-15
Description
Directional Antenna
A directional antenna is used to receive 1090MHz and transmit
1030MHz for models with TAS.
Alternate Displays
Screen information may look different on displays interfaced with the
Lynx NGT-9000. Refer to that display’s manual for a description of
how information is depicted.
The operation and display features provided in this Pilot’s Guide are
specific to the information depicted on the Lynx NGT-9000.
Personal Electronic Device (PED)
The Lynx NGT-9000 supports the use of personal electronic devices
(e.g., tablets) via a WiFi connection. The PED must use compatible
applications that support the ADS-B broadcast services (i.e., ADS-
B In, TIS-B, ADS-R, and FIS-B). Check with an avionics dealer
or contact L-3 Avionics Systems for a current list of compatible
applications.
WiFi Serial Adapter
This device provides a WiFi connection between the Lynx NGT-9000
and the PED. It is permanently attached to the aircraft via the wiring
harness.
CP-2500 Control Panel
The CP-2500 is a control panel offered by L-3 Avionics Systems. It
is the only compatible control panel for the remote mount Lynx NGT-
9000. The operational information provided in this guide is limited.
Refer to the CP-2500 Pilot’s Guide (0040-17250-01) for detailed
information.
To Next Page
Loading...