Lynx
®
NGT-9000
Pilot’s Guide2-22
Operation
Selected Traffic ID
The Selected Traffic ID appears along the right side of both screens
after a traffic symbol is pressed. The Traffic ID is removed when the
selected traffic symbol is tapped, a Traffic Advisory (TA) occurs, or if
the selected traffic is no longer being tracked. The Traffic ID is restored
to the screen if the Traffic Advisory is no longer present and if no other
user action (i.e., selecting a different traffic symbol, tapping a button,
or changing the zoom range) has occurred since the Traffic Advisory
occurred. See figure 2-8.
Selected Traffic GS
The Selected Traffic GS (if configured) appears along the right side
of both screens (under the selected traffic ID) after a traffic symbol is
pressed. The Traffic GS is removed when the selected traffic symbol
is tapped, a Traffic Advisory (TA) occurs, or if the selected traffic is no
longer being tracked. The Traffic GS is restored to the screen if the
Traffic Advisory is no longer present and if no other user action (i.e.,
selecting a different traffic symbol, tapping a button, or changing the
zoom range) has occurred since the Traffic Advisory occurred. See
figure 2-8.
True Track (TRK)
This indication is shown on the lower right side of the traffic screen
when track is being used as the direction source.
Figure 2-12: Example of Traffic Information Window
Display GS
Done
Information
FLT ID: N123CD
Type: Small
Dist: 105kts
To Next Page
Loading...
Need help?
General
