Name: Lynx NGT-9000 Series
Brand: Lynx
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Lynx

NGT-9000

Pilot’s Guide2-18

Operation

TFC Button

The Traffic (TFC) button replaces the Altitude Mode button when the

status of the aircraft is On-Ground. The button also activates TAS

(optional) when the aircraft is On-Ground. A description of each mode

is detailed below:

Ground (GND): The display shows ground traffic only and places

TAS in Standby. Standby indication is shown on the Traffic Mode

Indicator.

Air (AIR): The display shows air traffic only and activates TAS.

All (ALL): The display shows air and ground traffic and activates

TAS.

Transponder Banner

When the traffic application is displayed on the left screen, the

transponder banner is displayed at the top of the left screen with the

following information:

Quick return button is labeled “XPDR” and is used to return to the

Transponder Application screen

Mode A squawk code

Reply “R” or Ident “ID” indicator shown to the right of the squawk

code when either function is active.

Current transponder operating mode status indicator with green

text. An amber “XPDR Failed” is shown when the transponder

function has failed.

MSG Button

The MSG Button seen on the Traffic Screen has the same functionality

as the one shown on the Transponder screen. See page 2-10 for

details.

Traffic Mode Indicator

The Traffic Mode Indicator is available only when a Lynx NGT-9000

with TAS is installed. Otherwise the “ADS Only” is assumed to be

operating for non-TAS installs.

The indicator is shown above the Zoom in (+) button. The possible

modes of operation are detailed below:

•

Lynx NGT-9000 Series User Manual

Questions and Answers: