EasyManua.ls Logo

Lynx NGT-9000 User Manual

Lynx NGT-9000
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Lynx
®
NGT-9000
MultiLink Surveillance System
Part Number: 9029000-( )
Installation Manual
This manual contains installation instructions and
recommended flightline maintenance information
for the Lynx NGT-9000 MultLink Surveillance
System, Configuration Module, and Directional
Antenna. Guidelines for external equipment
necessary for installation are included. This
information is supplemented and kept current by
revisions, service letters and service bulletins.
0040-17001-01 (Revision A)
January 15, 2015

Table of Contents

Other manuals for Lynx NGT-9000

Questions and Answers:

Lynx NGT-9000 Specifications

General IconGeneral
BrandLynx
ModelNGT-9000
CategorySecurity System
LanguageEnglish

Summary

Section 1 General Information

1.1 Functional Description

Details system capabilities like ADS-B, TAS, and various interfaces.

1.2 Specifications

Lists key technical parameters and compliance standards.

1.3 Equipment Required Not Supplied

Lists essential external components for installation.

1.4 Installation Approval and Limitations

Outlines regulatory approvals and installation constraints.

Section 2 Installation

2.1 Installation Procedures

General steps and considerations for installing the system.

2.2 Location and Mounting

Guidance on selecting optimal mounting locations for components.

2.3 Electrical Connections and Cabling

Details wiring requirements and cable preparation.

Section 3 Installation Checkout

3.1 System Setup and Configuration

Covers using the MPC, Lynx MAT, and configuring options.

3.2 Calibration Procedures

Details audio, screen, and TAS antenna calibration.

3.3 Interface and Data Checks

Verifies signal integrity and live data streams.

3.4 Final Installation Checkout

Validates overall system operation and functionality.

Section 4 Maintenance

4.1 Periodic Maintenance

Details regular inspection and servicing tasks.

4.2 Fault Isolation

Guides in diagnosing and resolving system issues.

4.3 Using the Maintenance PC

Procedures for software, database updates, and data retrieval.

4.4 Return to Service

Procedures for validating system after maintenance or replacement.

Appendix A Interface Signal Name & Cable Characteristics

A.1 Input and Output Interfaces

Describes various signal interfaces.

A.2 Pin Definition Summary

Provides a summary of connector pin assignments.

Appendix B Environmental Qualification Form

B.1 NGT-9000 Environmental Qualification

Details environmental test results for the NGT-9000 unit.

Appendix C Configuration and Checkout Log

C.1 Log Sheet for Configuration and Checkout

Provides a template for recording installation data.

Related product manuals