Lynx NGT-9000 User Manual

Lynx NGT-9000
Installation Manual
6. Safety Equipment
a. TAWS (If Installed)
Verify the function of the TAWS and Terrain Display while monitoring the effects of the unit.
b. Weather Monitoring System (If Installed)
Verify the function of the weather monitoring system while monitoring the effects of the unit.
• Display Check
1. Position the aircraft outside with an unobstructed view of the sky. Apply power to the unit and
supporting equipment.
2. Verify that system status has passed.
3. Verify that there are no new system messages, indicated by a blinking MSG button.
4. Verify that the Transponder Application (left screen) and the Traffic Application (right screen) are
providing data. Note – The data may be degraded until the GPS has acquired a position fix.
• Flight Test
It is recommended that a flight test be conducted after installation to verify proper operation of the Lynx
NGT-9000s system per the AML STC.
• Installation Checkout Complete
This completes the Checkout procedure.
0040-17001-01 Installation Checkout Page 3-33
Revision A January 15, 2015

Lynx NGT-9000 Specifications

General

Brand	Lynx
Model	NGT-9000
Category	Security System
Language	English