214328 100 Revision A
Table .16 D65 Predelivery Checklist – North America (continued)
üü
Item
Reference
Run-up procedure
6 Running up Header, page 81
Check hydraulic hose and wiring harness routing for
clearance when raising or lowering header and reel.
—
Check knife drive pulley(s) is rotating in proper direction:
clockwise on left side; counterclockwise on right side
(double knife only).
—
Check lights are functional.
—
Check reel lift cylinders extend fully.
—
Confirm reel movement: tilt, fore, and aft.
—
Post run-up check. Stop engine.
6.1 Performing Post Run-Up Adjustments, page
82
Check belt drives for heated bearings.
—
Check knife sections for discoloration caused by
misaligned components.
6.1.1 Adjusting Knife and Guards, page 82
Check for hydraulic leaks.
—
Check manual storage case contains operator’s manual
and parts catalog.
5.15 Checking Manuals, page 80
Date checked:
Checked by:
REFERENCE
To Next Page
Loading...
