List of Revisions
The following list provides an account of major changes from the previous version of this document.
Summary of Change
Location
Removed images of reel shipping brace bolts and tags
from beginning of topic; intended for export
version only.
3.1 Attaching Reel Lift Cylinders, page 17
Moved Assembling the Header chapter before the
Attaching Header to Windrower chapter.
• 3 Assembling Header, page 17
• 4 Attaching Header to Windrower, page 35
Added note about removing shipping wires from reel
tines one row at a time.
3.2 Attaching Cam Arms, page 24
Added step to check/remove lateral movement. 3.5 Installing Crop Dividers with Latch Option, page 27
Bundles MD B#5426 and MD B#5194 superseded by
MD B#5577.
4.2 Connecting Hydraulics, page 44
Added important note to reposition breather plugs on
both sides of a dual knife header.
5.4 Checking Knife Drive Box, page 53
Deleted step as per product support feedback. 5.7.1 Checking Pointed Guard Hold-Downs, page 57
Moved topics to keep all reel checking and adjusting
topics together.
5.9 Measuring and Adjusting Reel Clearance to
Cutterbar, page 64
Added reel cam checking topic.
5.9.1 Checking and Adjusting Reel Cam, page 64
• Reorganized list per Product Support feedback
• Added check knife hold-down
• Added check for and remove all shipping wires and
strapping
Predelivery Checklist, page 99
214328 iii Revision A
To Next Page
Loading...
