© 2019 EnergyLogic, LLC Toll Free: 800 311 8828 Fax: 615 471 5202 www.energylogic.com 31
Rev. Date 040819
1.4.3 Fixed Angle Mount
Unistrut Safety Cable
Complete safety cable installation and turn to page 47
The safety cable must be securely attached to the
building structure and NOT the unistrut. It can be
attached to I-beams, steel trusses, or Glulams
as shown in sections 1.4.1 and 1.4.2. Avoid sharp
edges. If you are unsure how to secure the safety
cable properly, contact a structural engineer.