© 2019 EnergyLogic, LLC Toll Free: 800 311 8828 Fax: 615 471 5202 www.energylogic.com 43
Rev. Date 040819
Ensure the
fan is level
2.3 All Universal Mounts
Motor Unit
Do not bend rubber boot
WARNING: Do not put too much tension on the safety cable. This will
deform the rubber boot and hinder the proper cooling of the motor.
Universal Mount I-Beam safety cable starts on page 44
Universal Mount Glulam safety cable starts on page 45
Universal Mount Unistrut safety cable starts on page 46
To Next Page
Loading...
