MacroAir Technologies EnergyLogic AVD3 - Page 50

© 2019 EnergyLogic, LLC Toll Free: 800 311 8828 Fax: 615 471 5202 www.energylogic.com 49
Rev. Date 040819
Hand Tighten ONLY
3. Guy Wire Installation
Tighten the jam nuts
Note: Make sure the
fan remains level
NOTE: Do not use tools to tighten the turnbuckles; only use tools to
tighten the jam nuts. The guy wires MUST be taut so that there is no
movement in the motor or extension tube.