MAINTENANCE AND LUBRICATION GRT9165 SERVICE MANUAL
9-8
Published 10-01-2020 Control # 699-00
Cummins Engineering Specification numbers. Select the one
that applies to your engine, and view the registered oils.
Safety
To lubricate many of the locations on the crane, the engine
must be started. Parts of the crane, to include the boom,
superstructure, outriggers, and the like, must be retracted or
extended, or swung left or right, which movement may cause
pinching and crushing hazards.
After positioning areas of the crane for lubrication, turn off the
engine and make sure that the moving parts of the crane are
stopped before approaching.
Table 9-4 : Approved Lubricant Reference Table
WARNING
Crushing Hazard!
Movement of the superstructure the boom, and outriggers
may create a crushing and/or pinching hazard.
Make sure that personnel maintain an adequate
clearance from moving parts when these parts are
operated during lubrication of the crane.
Failure to follow this instruction may cause serious injury
or death to personnel.
Ref. Approved Lubricant
Lube Specification
Down To -9˚C
(+15˚F)
Lube Specification
Down To -29˚C
(-20˚F)
Lube Specification
Down To -40˚C
(-40˚F)
A Extreme Pressure Multipurpose Grease 6829003477 6829104275 6829104275
B Gear Lube (GL-5) 6829012964 6829014058 6829014058
C Fully Formulated Anti-Freeze Coolant 6829101130 6829101130 6829104212
D Liquid Coolant Conditioner (LCC) 6829012858 6829012858 6829012858
E Tractor Hydraulic Fluid 6829006444 6829101559 6829101559
F Engine Oil (SAE) 6829104182 (15W-40) 80056036 (0W-40) 80056036 (0W-40)
G Open Gear Lube 6829102971 6829102971 6829102971
H Extreme Pressure Gear Lube 6829100213 6829103636 6829103636
J Hydraulic Oil 6829006444 6829101559 6829101559
K Diesel Exhaust Fluid (DEF) 80019225 80019225 80019225
L Extreme Pressure 3% MOLY Grease 6829015304 6829104275 6829104275
M BECHEM PAL1 01373458 01373458 01373458
N BECHEM High-Lub LM 2 EP (400g) 03313195 03313195 03313195
To Next Page
Loading...
Need help?
General
