Mannesmann ecodrive03 - Page 110

5-2 Replacing or Exchanging Drive Components ECODRIVE03 SMT-02VRS
DOK-ECODR3-SMT-02VRS**-WA01-EN-P
Pre- formed engine performance cable
1)
2)
2)
Pre- formed engine feedback cable
1)
_ _ _ _ _ _ _ - _ _ _ - _ _ _ _ _ _ / _ _ _ _
1. Pre- formed cables made by INDRAMAT (with connector) are identified with a
model label. The label provides the ordering information (IKS 103 for the Feedback
cable, for instance).
2. If cables are ordered without the connector, refer to the stamp on the cable
sheathing (Engine Feedback Cable IN 488, for instance).
AP5143F1.fh7
Barcode
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
H1
S1
S3 S2
Barcode Typenschild
123456789 1234
11121314 15161718
5678
1234 1234 5678
Specifications for model label
DKC _._ - _ _ _ _ - _
S.No .: _ _ _ _ _ _
FWA-ECODR3 _-_ _ _-_ _VRS-MS
Hardware-
serialnumber
Software-
serialnumber
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
H1
S1
S3 S2
INDRAMAT - cable
IKG _ _ _
No.:
length: m
INDRAMAT - cable
IKS _ _ _
No.:
length: m
Fig. 5-1: Type designations of the drive components