Mannesmann ecodrive03 User Manual

4-6 Description of Diagnostic Letters B..., C..., D... and A... ECODRIVE03 SMT-02VRS
DOK-ECODR3-SMT-02VRS**-WA01-EN-P
C105 Configurated length > max. length for MDT
Cause:
Telegram type 7 was set in parameter S-0-0015, Telegram type
parameter.
The length of the configured data in MDT, which is determined by
S-0-0024, Configurations list of the master data telegram,
exceeds the maximum permissible length S-0-0186, Length of the
configurable data record in the MDT.
Remedy:
•
set preferred telegram (telegram type = 0..6 )
•
number of configured parameters in MDT (S-0-0024) must be
decreased
See also the functional description: "Configuration of Telegram Contents"
C106 Config. IDN for AT not configurable
Cause:
Telegram type 7 was set in parameter S-0-0015, Telegram type
parameter.
Parameters which are not contained in S-0-0187, List of configurable
data in AT can be seen in
S-0-0016, Custom amplifier telegram configuration list.
Remedy:
•
set preferred telegram (telegram type = 0..6 )
•
S-0-0016, Configuration list of drive telegrams must have
parameters that are also in S-0-0187, List of configurable data in
the AT.
Note: List parameters only allowed in multiplex channel.
See also the function description: "Configuration of Telegram Contents"
C107 Configurated length > max. length for AT
Cause:
Message frame type 7 has been selected in S-0-0015, Telegram Type
Parameter.
The length of the configured data record in the AT, that is defined via
S-0-0016, Custom amplifier telegram configuration list, exceeds the v
maximum permissible S-0-0185, Length of the configurable data
record in the AT.
Remedy:
• set preferred telegram (telegram type = 0..6 )
• number of configurated parameters in the AT (S-0-0016) must be
decreased
See also the functional description: "Configuration of Telegram Contents"

Mannesmann ecodrive03 Specifications

General

Brand	Mannesmann
Model	ecodrive03
Category	DC Drives
Language	English