WARNING - Never leave your Mark 7® Autodrive unattended while it is operating.
WARNING – Never run the Mark 7® Autodrive without the crank shield fully attached.
WARNING – Never operate the Mark 7® Autodrive if it is out of factory specification.
WARNING – Never operate the Mark 7® Autodrive unless it is completely within Dillon
Precision factory specifications and is operating within factory parameters. This
includes the shell plate locating pins and other machine-specific features. Read and
understand the latest Dillon Precision 650 manual for your make and model machine and
ensure that you fully understand the Dillon directions.
WARNING – Never operate the Mark 7® Autodrive with any third party accessories that
substantially change the operation of the Mark 7® Autodrive
WARNING – Never operate the Mark 7® Autodrive while impaired.
To Next Page
Loading...
