WARNING – Never operate that Mark 7® Autodrive without using high quality brass and
always use sufficient lubrication on your brass while operating the Mark 7® Autodrive.
WARNING – the Mark 7® Autodrive is designed to help automate the process of loading
and processing of ammunition. Never operate the Mark 7® Autodrive at speeds higher
than you have tested and are comfortable with for the type of reloading or processing
that you are undertaking. Run the Mark 7® Autodrive at the slowest possible setting to
create quality ammunition.
WARNING – Always wear protective clothing and eyewear. Flying debris may result when
using this equipment. It is the responsibility of the user to ensure that appropriate
protective clothing and equipment are used to provide protection from those hazards to
which personnel are exposed or could be exposed while working with this product.
Failure to do so could result in serious injury or death.
To Next Page
Loading...
