Page 10 / 100 Technical Notice V1.0 / 01.09
1 Introduction
1.1 Typographical conventions
The following styles are used in this manual.
1.1.1 Description
This style, use in conjunction with illustration numbers, is preceded with the corresponding numbers:
Example:
(1) First element
(2) Second element
(3) Etc...
1.1.2 Command
Any software command, button, function key, window, icon, option, tab, checkbox, selection box, article,
menu, tool bar, field and section used in this document is represented by a bold italic font.
Example:
The Exit command allows to quit the software.
1.1.3 Procedure
Each procedure step to be carried out step-by-step by the user is preceded by a letter.
Example
A. Open the drawer.
B. Put the microplate into position as shown.
C. Close the drawer.
1.1.4 Procedure result
A procedure result is shown by the following symbol
.
Example
A. Click on the Parameters button.
The parameter window is displayed.
To Next Page
Loading...