Matrix SETU VFXTH - Page 106

101 Matrix SETU VFXTH System Manual
• Similarly, you can create group of sequential and not-sequential FXO Ports as members.
• You may create the Fallback Routing Group.
• Select the Fallback Routing Group Apply check box.
• Follow the same instructions for creating sequential and not-sequential groups for FXS Ports and
FXO Ports.
• Click Submit to save changes. The Edit window closes.
• The changes you made appear in the Destination Port/Group for SIP Trunk window. Close this window
to return to the main page.
On the basis of Destination Number
In this method, incoming calls on the source port are routed to the destination port on the basis of the destination
number (called party number) dialed by the caller.
To apply this method, do the following:
• In the Select Destination Port for routing calls box, click On the basis of Destination Number.
• Click Settings .
The SIP Trunk - Destination Port Determination - Destination Number Based table window opens.