Matrix SETU VFXTH System Manual 104
• For the No Match Found entry, under Edit, click Settings .
• The Edit Entry window opens.
• Create the Routing Group and Fallback Routing Group.
• Click Submit and close the window.
• Follow the same steps as above to add another entry to this table.
• To delete an entry, select the check box and click Delete button.
• Close the window if you have finished adding/editing entries.
You can also configure the Destination Number Based Table from Advanced Settings. See
“Destination Port Determination” under Advanced Settings.
On the basis of Calling Party Number
In this method, incoming calls on the SIP Trunk are routed to a specific port, as per the calling party's number.
To apply this method, do the following:
• In the Select Destination Port for routing calls box, click on the basis of Calling Party Number.