Matrix SETU VFXTH System Manual

107 Matrix SETU VFXTH System Manual
• Select FXS Group number. Default:1.
• Click Settings . The FXS Groups window opens. Create the FXS Group. See “Group” for
detailed instructions.
• Similarly, you can create group of sequential and not-sequential FXO Ports as members.
• You may create the Fallback Routing Group. To do this,
• Select the Apply check box.
• Follow the same instructions for creating sequential and not-sequential groups, for FXS Ports and
FXO Ports.
• Click Submit to save changes. The Add Entry window closes.
• The entry you added appears in the SIP Trunk- Destination Port Determination - Calling Number
Based window.
• By default FXS Port 1-1 (Ascending) is assigned as the Routing Group, for routing calls from numbers
that do not match with any of the destination numbers you configured in the Calling Number Based
Table, that is, the No Match Found entry.
To change the default Routing Group and to create the Fallback Routing Group for the No Match Found
numbers,
• For the No Match Found entry, under Edit, click Settings .

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English