113 Matrix SETU VFXTH System Manual
If you have enabled CLIR and Identity header in INVITE message is configured other than None, then
SETU VFXTH will add Privacy = ID header in the INVITE message during an outgoing call from the SIP
Trunk.
• If you select P-Preferred Identity or P-Asserted Identity in Identity header in INVITE message, then
select the desired option for sending SIP ID in Identity header of INVITE message during an outgoing
call. You may select:
• Send SIP ID configured,
• Send Caller ID received on Source Port,
• Send Caller ID after applying Reverse DDI logic,
• Send Fixed Number.
Default: Send SIP ID configured.
• If you select Caller ID after applying Reverse DDI logic, SETU VFXTH allows you to configure the
desired option for If no match found using Reverse DDI logic. You may select:
• SIP ID configured
• Caller ID received on Source Port
• Fixed Number.
Default: SIP ID configured
• If you select Send Fixed Number option for SIP ID in "FROM" header of INVITE message or If no
match found using Reverse DDI logic, you must configure the Fixed Number. The Fixed Number
can be a maximum of 24 characters. Characters 0-9, +, * # and dot(.) are allowed. Default: Blank.
• Select the Reverse DDI Reference ID, if you have selected Caller ID after applying Reverse DDI logic as
SIP ID in "FROM" header of INVITE message and/or Send Caller ID after applying Reverse DDI logic as
SIP ID in Identity header of INVITE message.
SETU VFXTH will compare the Reference ID configured on the SIP Trunk with the one configured in the
SIP Trunk - Destination Number Determination: DDI Number Based Table. If a match is found, SETU
VFXTH will send the corresponding DDI Number to the Called Party.
• You can apply Automatic Number Translation logic on outgoing calls made from the SIP Trunk.
• To apply ANT logic on the Called Numbers, click the Automatic Number Translation (ANT) for
Called Number check box. Default: Disabled.
• In the Use Automatic Number Translation Table, select the ANT Table number you have configured
for the Called Numbers. Default: Table 1.
If you have not configured the Automatic Number Translation Table,
To Next Page
Loading...
Need help?
General
