Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 244
The Notification Destination can be an IP Address or a Domain Name and the Port of the Manager or of
any other device where you want to receive the trap messages. IP Address/Domain Name can be a
maximum of 64 characters. Valid range of the port is 0-65535. Default port is 162.
• Click Submit button to save the settings.
Notification Filters
By default, you get error notifications, information and warnings for events related to the Application, Network and
all Port Types. See table at the end of this topic for the event list. You can choose the type of notification you want
by setting the notification filters.
To set filters, click Notification Filters link to expand.
To disable any filter, clear the respective check box.
You must upload MIB file in your SNMP Manager to get the status and notifications for SNMP. Contact
Matrix Support team for the MIB file.
The List of Events for which you will receive notification is presented in the following table.
Application
Error Warning Information
System Reboot/Gateway
Restarted
System boot/initialized
Web Login - Authentication failure Web JEEVES Login/Logout status
CDR Buffer full Password change
SE Login blocked for IP = IP
Address
System Config set to default
Page config set to default

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English