291 Matrix SETU VFXTH System Manual
Telephony features:
• Voice Calls using SIP proxy and Voice calls without using SIP proxy (Peer-to-Peer Calling)
• Battery Reversal- Useful when some billing machine is connected to SETU VFXTH
• Black Listed Callers
• Call Disconnect Tone
• Call Forwarding
• Call Hold
• Call Pick-up
• Call Toggle- Used to toggle between active and held call
• Call Transfer
•Call Waiting
• Conference
• Disconnect Call using Access Code
• Do Not Disturb (DND)- Incoming calls can be rejected
• Hotline
• Making New Call
• Making Second Call
• Message Wait Indication
Time Settings
Synchronizing with specific Time Server
Provisioning, Administration and Maintenance
• Auto Firmware and Configuration upgrade
• Programmable using Web Jeeves
LED Indication (Total 34 LEDs)
• Power = 1
• Status = 1
• Port = 32
Packing
• Dimension (W x D x H): 407 x 172 x 51.45 mm (without side clamps)
483 x 172 x 51.45 mm (with side clamps)
• Unit Weight: 1.410 kg.
• Mounting: Wall Mounting, 19” Rack and Table-Top
Power Supply
• External Adaptor: 24V DC @2.5A
• Power Consumption: 60 Watts (Maximum)
• Connector: DC Power Jack
Environmental
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Storage Temperature: -20 °C to 70 °C (-4 °F to 158 °F)
• Operating Humidity: 5-95% RH (Non-Condensing)
• Storage Humidity: Max. 0-95% RH (Non-Condensing)
To Next Page
