Matrix SETU VFXTH - Page 53

Matrix SETU VFXTH System Manual 48
If you select Route calls to Fixed Port, click Settings to configure the Destination Port/Group for
routing the call. For instructions, see “Fixed”.
Allowed - Denied Logic (Toll-Control)
With the Allowed-Denied Numbers feature you can permit and restrict the dialing of particular numbers from the
FXS Port.
The Allowed Denied Number Logic makes use of two Number lists:
• Allowed Numbers List: This is the list of numbers that can be dialed out from the FXS Port. By default,
List Number 5 is assigned to the FXS Port.
• Denied Numbers List: This list contains the numbers that are to be restricted from being dialed out from
the FXS Port. By default, List Number 6 is assigned to the FXS Port.
To apply Allowed - Denied Logic on the FXS Port, do the following:
• Click the Allowed - Denied Logic check box. Default: Disabled.