61 Matrix SETU VFXTH System Manual
To apply this method, do the following:
• In the Route all incoming calls (with CLI) list, click on the basis of Calling Party Number.
• Click Settings .
The FXO Port Destination Number Determination: Calling Number Based Table opens.
• Configure the Calling Number Based table for the FXO Port. You can enter up to 500 Calling Party
Numbers and their corresponding Destination Numbers in this table.
• In the Calling Number column, enter the calling party numbers. The Calling numbers may consist of a
maximum of 24 characters. Default: Blank.
To Next Page
Loading...
