Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 64
Destination Port for Routing Calls
Select the Destination Port for routing calls for the FXO Port. You may select from any of the following options:
•Fixed
• on the basis of Destination Number
• on the basis of Calling Party Number
Default: Fixed
If the destination number to be dialed out is an IP Address, SETU VFXTH will not check the Destination
Port Determination Method. Instead, it will route the call using the SIP Trunk / Group programmed for IP
Dialing. (See “IP Dialing” to know more).
Fixed
In this method, calls received on the FXO Port are routed to a fixed destination port, irrespective of the number
dialed on the FXO Port.
To apply this method, do the following:
•In Select Destination Port of routing calls, click Fixed.
• Click Settings .
The Destination Port/Group for FXO Port window opens.
• To change the default Routing Group and create the Fallback Routing Group, under Edit,
click Settings .

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English