Matrix SETU VFXTH System Manual

65 Matrix SETU VFXTH System Manual
The Edit Selective Port/Group for FXO Port window opens.
• Select the CLI Number to be sent on Destination Port. You may select from the following options:
• Received Calling Party
• Received Called Party
Default: Received Calling Party
CLI Number to be sent on Destination Port is applicable when FXS Port/Group is determined as the
Destination Port.
• Create the Routing Group.
• To create a group of sequential FXS Ports as members,
• Select the desired FXS Port numbers as members. Default: 1.
• In the in - order field, select the order in which the system should hunt for a free member FXS
Port to route the call.
Select Ascending to start hunting from the first to the last member FXS Port. Select
Descending to start hunting from the last to the first member FXS Port. Default: Ascending.
• To create a group of not-sequential FXS Ports as members,
• Select a FXS Group.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English