Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 66
• Select FXS Group number. Default:1.
• Click Settings . The FXS Groups window opens. Create the FXS Group. See “Group” for
detailed instructions.
• Similarly, you can create group of sequential and not-sequential FXO Ports and SIP Trunks as
members.
• You may create the Fallback Routing Group. To do this,
• Select the Apply check box.
• Follow the same instructions for creating sequential and not-sequential groups for FXS Ports, FXO
Ports and SIP Trunks.
• Click Submit to save changes. The Edit window closes.
• The edited entry appears in the Destination Port/Group for FXO Port window. Close this window to
return to the main page.
On the basis of Destination Number
In this method, incoming calls on the source port are routed to the destination port on the basis of the destination
number (called party number) dialed by the caller.
To apply this method, do the following:
•In Select Destination Port for routing calls, click On the basis of Destination Number.
• Click Settings .

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English