Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 72
• To create a group of not-sequential FXS Ports as members,
• Select a FXS Group.
• Select FXS Group number. Default:1.
• Click Settings . The FXS Groups window opens. Create the FXS Group. See “Group” for
detailed instructions.
• Similarly, you can create group of sequential and not-sequential FXO Ports and SIP Trunks as
members.
• You may create the Fallback Routing Group. To do this,
• Select the Apply check box.
• Follow the same instructions for creating sequential and not-sequential groups, for FXS Ports, FXO
Ports and SIP Trunks.
• Click Submit to save changes. The Add Entry window closes.
• The entry you added appears in the FXO Port - Destination Port Determination - Calling Number
Based window.
• By default SIP Trunk 1-1(Ascending) is assigned as the Routing Group, for routing calls from numbers
that do not match with any of the destination numbers you configured (No Match Found).
To change the default Routing Group and to create the Fallback Routing Group for No Match Found
numbers entry,

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English