Matrix SETU VFXTH System Manual

75 Matrix SETU VFXTH System Manual
• The Number List page opens in a new window.
• By default, Number List 1 is assigned as Allowed Number List.
• Enter the numbers you want the system to allow to be dialed in this list.
• Click Submit to save the entries and close the window.
• To configure the Denied Number List, click Settings .
• The Number List page opens in a new window.
• By default, Number List 2 is assigned as Denied Number LIst.
• Enter the numbers you want the system to restrict from being dialed out in this list.
• Click Submit to save the entries and close the window.
You may configure a different Number List as Allowed and Denied List. See “Allowed - Denied Logic” under
“Number Lists”.
Handling of Outgoing Calls
When a FXO Port is determined as the destination port, the numbers dialed from this port constitute outgoing calls.
• Click Handling of Outgoing Calls.
• If you do not want to route outgoing calls through this port, select the Block calls through this FXO Port
Yes check box.
• You can apply Automatic Number Translation logic on outgoing calls made from the FXO Port.
• To apply ANT logic on the Called Numbers, click the Automatic Number Translation (ANT) for
Called Number check box. Default: Disabled.
• In the Use Automatic Number Translation Table, select the ANT Table number you have configured
for the FXO Port. By default, Table 1 is assigned to the FXO Port.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English