Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 92
Handling of Incoming Calls
• Click Handling of Incoming Calls.
• If you do not want to route calls received on this SIP Trunk, select the Block all calls received on this SIP
Trunk check box. Default: Disabled.
• By default, SETU VFXTH identifies the Called Party Number for routing the incoming call on the SIP Trunk
further, by the number received in the Request-URI of the INVITE message.
If you want the system to identify the Called Party Number from the ‘To Field’ of the INVITE message, in
the Use Called Party Number From parameter, select the To Field option.
Destination Number Determination
Select the desired destination number determination method for routing incoming calls with and without CLI.
•To Route all Incoming calls (with CLI), you may select from any of the following methods.
• without any Destination Number
• to the Fixed Destination Number
• on the basis of Calling Party Number
• on the basis of DDI Number
• to the Called Party Number

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English