Matrix Visionpro System Manual

115 Matrix VISIONPRO System Manual
• To enable/disable CDC for Incoming Calls in a CDC table, dial,
4911-1-CDC Table-Code
Where,
CDC Table is from 0 to 3.
• To enable/disable CDC for Incoming Calls in all CDC tables at once, dial,
4911-*-Code
• To enable/disable CDC for Internal Calls in a CDC table, dial,
4912-1-CDC Table-Code
Where,
CDC Table is from 0 to 3.
• To enable/disable CDC for Internal Calls in all CDC tables at once, dial,
4912-*-Code
• To assign the disconnection flag to a CDC table, dial,
4913-1-CDC Table-Disconnection Flag
Where,
CDC Table is from 0 to 3.
• To assign the same disconnection flag to all CDC tables at once, dial,
4913-*-Disconnection Flag
• To assign the CDC Timer to a CDC table, dial,
4914-1-CDC Table-CDC Timer
Where,
CDC Table is from 0 to 3.
CDC Timer is from 000 to 999 seconds.
Default: 160 seconds
• To assign the same CDC Timer to all CDC tables at once, dial,
4914-*-CDC Timer
• To assign an Allowed List to a CDC table, dial,
4915-1-CDC Table-Allowed List
Where,
CDC Table is from 0 to 3.
Allowed List is from 0 to 7.
• To assign the same Allowed List to all the CDC tables at once, dial,
4915-*-Allowed List
Code Meaning
0 CDC for Incoming Call is to be disabled
1 CDC for Incoming Call is to be enabled
Code Meaning
0 CDC for Internal Call is to be disabled
1 CDC for Internal Call is to be enabled
Disconnection
Flag
Meaning
0 Call is not disconnected
1 Call is disconnected

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English