Matrix Visionpro System Manual

Matrix VISIONPRO System Manual 116
• To assign a Denied List to a CDC table, dial,
4916-1-CDC Table-Denied List
Where,
CDC Table is from 0 to 3.
Denied List is from 0 to 7.
• To assign the same Denied List to all CDC tables at once, dial,
4916-*-Denied List
• To assign a CDC Table to another station, dial the command 4920 as described at the beginning of
configuration.
• To restore the default settings of a CDC table, dial,
4901-1-CDC Table-#
Where,
CDC Table is from 0 to 3.
• To restore the default settings of all CDC Tables at once, dial,
4901-*-#
• Exit SE mode.
Example: Program station 21 (software port number 00) for the following requirement:
Disconnect all calls after 180 seconds.
Solution:
Assign default CDC table 3 to station 21. Dial 4920-1-00-3 in SE mode.
Since default CDC Timer is 160 seconds and 20 seconds are added as warning time, the calls will get disconnected
after 180 seconds. Hence no programming is required.

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English