Matrix Visionpro

Matrix VISIONPRO System Manual 142
Feature Indexes from 17 to 19 are left blank. You will get Error Tone if you try to configure these indexes.
Relevant features from this list can be selected and configured in a group. You can make few feature access
groups depending upon the requirement. By default, the first group has none of the features enabled. Second
group has only internal dialing enabled. Third group has common features like Call Pickup, Call Transfer, Internal
Dialing etc. The eighth group has all the features enabled.
The default CoS group chart is displayed in the table below:
28 Live Call Supervision
29 Raid
30 DOSA
Group01234567
00 NYYYYYYY
01 NNYYYYYY
02 NNYYYYYY
03 NNYYYYYY
04 NNYYYYYY
05 NNYYYYYY
06 NNYYYYYY
07 NNYYYYYY
08 NNNYYYYY
09 NNYYYYYY
10 NNNYYYYY
11 NNNYYYYY
12 NNNYYYYY
13 NNNYYYYY
14 NNNYYYYY
15 NNNNYYYY
16 NNNNYYYY
17 NNNNYYYY
18 NNNNYYYY
19 NNNNYYYY
20 NNNNYYYY
21 NNNNNYYY
22 NNNNNYYY
23 NNNNNNYY
24 NNNNNNYY
25 NNNNNNYY
26 NNNNNNYY
27 NNNNNNYY
28 NNNNNNNY
29 NNNNNNNY
30 NNNNNNNY
Feature Index Feature Name