159 Matrix VISIONPRO System Manual
• To record DID voice message, refer “Voice Message Applications” for more details.
• Exit SE mode.
Example:
Activate DID for the trunk2 during Day time and Night time.
Solution. Dial the following commands in SE mode,
• 3501-1-2-1
• 3502-1-2-1
Timer Name Command Default (Sec.) Valid Range
DID Inactivity Timer 3022-Seconds 060 000 to 255
DOSA/DID Answer Wait Timer 3023-Seconds 005 000 to 255
DOSA/DID Music Timer 3024-Seconds 005 000 to 255
DOSA/DID Dial Tone Timer and
DOSA/DID Beeps Timer
3025-Seconds 005
000 to 255
DID Ring Timer 3026-Seconds 030 000 to 255
DOSA/DID Busy Tone Timer 3027-Seconds 005 000 to 255
DOSA/DID Error Tone Timer 3028-Seconds 005 000 to 255
To Next Page
Loading...
