Matrix Visionpro System Manual

Matrix VISIONPRO System Manual 198
Denied List is from 0 to 7.
• To assign the same denied list to all stations during Day time, dial,
4511-*-Denied List
• To assign denied list to a station during Night time, dial,
4512-1-Station-Denied List
Where,
Station is the software port number of the user from 00 to 07.
Denied List is from 0 to 7.
• To assign the same denied list to all stations during Night time, dial,
4512-*-Denied List
• If the requirement is not met by the default allowed and denied lists then write down the requirement on a
piece of paper and configure corresponding allowed and denied lists as described in the topic “Allowed
and Denied Lists”.
• Assign the customized allowed list to the stations using commands 4501 and 4502 for Day and Night
times respectively.
• Assign the customized denied lists to these stations using commands 4511 and 4512 for Day and Night
times respectively.
• To assign allowed list to a station for locked condition, dial,
4521-1-Station-Locked Allowed List
Where,
Station is the software port number of the user from 00 to 07.
Locked Allowed List is from 0 to 7.
• To assign the same allowed list to all stations for locked condition, dial,
4521-*-Locked Allowed List
• To assign denied list to a station for locked condition, dial,
4522-1-Station-Locked Denied List
Where,
Station is the software port number of the user from 00 to 07.
Locked Denied List is from 0 to 7.
• To assign the same denied list to all stations for locked condition, dial,
4522-*-Locked Denied List
• Exit SE mode.
How to use
Let us understand this with the help of an example:
The requirement of the organization is that Station 21 must be able to make calls to Mumbai (022) but should not be
able to make any other long distance calls.

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English