Matrix Visionpro System Manual

203 Matrix VISIONPRO System Manual
Where,
Part Number is from 01 to 15.
Part Number 00 is fixed for MoH application and cannot be used to record the message for another
application.
• To playback the recorded VM of a partition (except MoH), dial,
1406-Part Number
Where,
Part Number is from 01 to 15.
• To record the message/music for MoH, dial,
1411
It automatically records the message/music for MoH in Part Number 00.
• To playback the recorded MoH, dial,
1412
• To assign an application to a VM partition, dial,
1407-Voice Message Application-Part Number
Where,
Voice Message Application is from 01 to 12. Refer the below table for their meanings.
Part Number is from 00 to 15.
This command allows you to assign Part Number 00 since the user may use the MoH file (stored in Part
Number 00) for another application. For example, one can use the same music of MoH to be played during
Alarm calls also.
• You can also de-assign an application from a VM partition. To do that, dial,
1407-Voice Message Application-#
• To set default values for all the VM parameters, dial,
1401-#
Voice Message Application Meaning
01 Day Greeting
02 Night Greeting
03 Initial Guidance Message
04 Dial by Name Message
05 No Dial Message
06 Wrong Dial Message
07 Transfer Message
08 Busy Message
09 No Reply Message
10 Alarm
11
Emergency Message
a
a.Currently the Emergency Message does not have any applicability. Howev-
er, considering future implementations, it is provided in the system.
12 Auto Redial

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English