Matrix Visionpro

223 Matrix VISIONPRO System Manual
Operator
Programming using Phone Wizard
Real Time Clock
Station Group
Default Number wise LCR tables 3421-*-#
Program time zone Index for Mixed LCR 3432-1-Time Zone-Start Time-End Time
Program Number Index for Mixed LCR 3433-1-Number Index-Number String-#*
Program the Service Provider sequence for the each
time zone
3434-1-No. Index-TZ Index-SP0-SP1-SP2-SP3
Default Mixed LCR table 3431-*-#
Program the Operator Station 1101-Station
To enter Phone Wizard programming mode 1#98-SE Password
Set current date 27-Date-Month-Year-Day
Set current time 28-Hour-Minute
Set New SE Password 291-New SE Password
Set New SA Password 292-New SA Password
Class of Service 31-Ext-Day CoS Group-Night CoS Group
Toll Control 32-Ext-Day AL/DL List-Night AL/DL List
Clear all the features 343-Ext
Flash Timer for station 36-Ext-Flash Timer Count
Flexible Number 37-Software Port No.-Flexible Number-#*
Operator Station 391-Ext
Enable/Disable and Dial Type 41-Trunk-Enable/Disable Flag-Dial Type
DID ON/OFF 43-Trunk-Day Code-Night Code
DOSA ON/OFF 45-Trunk-Day Code-Night Code
Trunk Landing Destination for Day Mode 47-Trunk-Ext1-Ext2-Ext3-Ext4
Trunk Landing Destination for Night Mode 48-Trunk-Ext1-Ext2-Ext3-Ext4
Hunt Timer 212-Timer
Hunting Scheme
46-Trunk-Day Hunting Scheme-Night Hunting
Scheme
Set current Date 1001-Date-Month-Year
Set current Day 1002-Day
Set current Time 1003-Hours-Minutes
Program station group 4702-1-Station Group-Destination Index-Station
Program same station for all station groups 4702-*-Destination Index-Station
Program the time for which each station in the group
should ring
4703-1-Station Group-Destination Index-Timer