Matrix Visionpro System Manual

Matrix VISIONPRO System Manual 224
Station Parameters
Programming ring timer for stations with same
destination index for all station groups
4703-*-Destination Index-Timer
Program continuous/non-continuous ring for a
destination in the group
4704-1-Station Group-Destination Index-Continuous
Ring
Program continuous/non-continuous for station with
same destination index in all station groups
4704-*-Destination Index-Continuous Ring
Program rotation method for a station group 4705-1-Station Group-Rotation Method
Program rotation method for all the station group 4705-*-Rotation Method
Assign default stations to a station groups 4701-1-Station Group-#
Assign default stations to all station groups 4701-*-#
Program the CLIP type for a station 4101-1-Station-CLIP Type
Program same CLIP type for all stations 4101-*-CLIP Type
Configure the Flash Timer for a station 4102-1-Station-Flash Timer Index
Configure the Flash Timer for all stations 4102-*-Flash Timer Index
Configure digit padding for a station 4104-1-Station-Count
Configure digit padding for all stations 4104-*-Count
Configure the AC Impedance for a station 4105-1-Station-Code
Configure the same AC Impedance for all stations 4105-*-Code
Configure the Transmit Gain for a station 4106-1-Station-Code
Configure the same Transmit Gain for all stations 4106-*-Code
Configure the Receive Gain for a station 4107-1-Station-Code
Configure the same Receive Gain for all stations 4107-*-Code
Configure the Answer Signaling for a station 4111-1-Station-Code
Configure the same Answer Signaling for all stations 4111-*-Code
Configure the Disconnect Signaling for a station 4112-1-Station-Code
Configure the same Disconnect Signaling for all stations 4112-*-Code
Configure the Open Loop Disconnect Timer for a station 4113-1-Station-Code
Configure the same Open Loop Disconnect Timer for all
stations
4113-*-Code
Configure the Loop Current for a station 4116-1-Station-Code
Configure the same Loop Current for all stations 4116-*-Code
Configure the Loop Length for a station 4117-1-Station-Code
Configure the same Loop Length for all stations 4117-*-Code
Configure the Minimum Current for Off-hook Detection
for a station
4118-1-Station-Code
Configure the same Minimum Current for Off-hook
Detection for all stations
4118-*-Code
Configure the On-hook Detection Current or lower for a
station
4119-1-Station-Code
Configure the same On-hook Detection Current or lower
for all stations
4119-*-Code
Configure the Ring Type/Ringing Signal for a station 4120-1-Station-Code
Configure the same Ring Type/Ringing Signal for all
stations
4120-*-Code

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English